WEED-IT DASH

The console everyone has been waiting for! DASH makes farming easier, faster and more efficient. It offers real-time field and machine data to optimize crop protection. This state-of-the-art Dash interface allows you to fully customize the WEED-IT QUADRO detection and spray system and provides direct feedback of on-field performance. It’s data collection at it’s finest!

WEED-IT DASH Features

2pzXLA5MpkmKuob8AP0ZX8ZBel1

10" 3D High Definition Touchscreen

You’ve asked and we’ve listened! The 2025 WEED-IT comes with an all inclusive, state of the art high-definition 3D console for all your data and system management. 10” High resolution touchscreen - Day and night view - Real time data in 3D view - Ultimate spray optimization settings to minimize chemical waste - AND SO MUCH MORE!

Individual Nozzle Control

We’ve quadrupled the number of sections with Nozzle-by-Nozzle Section Control! That’s 144 sections on a 120’ boom! WITH variable rate control! Histograms show individual nozzle activity and crop density, high & low CDD activity, and nozzle history.

Mapping As Visited & As Applied

Collect all the date you could ask for AND convert it into multiple types of maps. Set your boundary, spray your field, and see the results! Where, What, When, and How Much is now all at your fingertips with job statistics and As-Applied maps based on data collected by every individual (144) nozzles. See it real time or as a PDF at the end of the job.

Layer Maps with Machine Data

From start to finish the WEED-DASH has you covered. We’ve brought it all together from client, farms, and field structure. DASH allows you to import field boundaries, create jobs, select up to 2 rates for the job, and at the conclusion of your spray job see a complete summary by overlapping application maps with machine data maps. Finally, store your data in the WEED-IT portal or upload it to your preferred ops center.

Remote Support

Wherever you may be, WEED-IT DASH now includes remote support through either 4G/LTE, WiFi, or GPS. With your permission our technicians can access your WEED-IT system remotely to walk you through operations and troubleshoot & resolve error messages. Firmware updates can now be done over the air to add, fix, or improve features.

Crop Density Mapping

(Coming in 2026) Map on a 10” X 10” resolution the crop density as measured by the WEED-IT sensor. This can be a passive mapping while broadcast spraying using PWM at a target rate, or it can be used actively via variable rate control to apply fertilizer or crop protection products.

Data Portal

The central hub where all your data is stored, collected and displayed, anytime, on any device. Dash Portal opens up a world of possibilities for your spray data. Within the portal you can convert data from .wdit to maps, display proof of placement and product, plot boundaries, put together prescription maps, and then upload it all to your preferred FMS.

Fence & Side Nozzles

(Coming Soon) DASH has taken optimizing chemical usage one step further! Reduce drift over property lines with Fence or Side Nozzles installed at the end of the boom. Side Nozzles spray straight down and inwards. Fence Nozzles spray to the outside and straight down. Controlled manually using DASH's individual nozzle control at the press of a button.

Spot In Crop

The most versatile green-on-green weed detection system on the market. By using the power of fluorescence WEED-IT can distinguish larger weeds from the crop without pre programmed crop data. DAY & NIGHT! 10" ultra small spray margin minimizes crop damage and environmental impact.

A-B Nozzle Switching

(Coming Soon) WEED-IT is making every drop of chemical count and insuring every weed is killed with A-B nozzle switching. At the press of a button you can now swap between two sets of nozzles to change rates on the fly. Or switch between 10" nozzles and 20" nozzles to make sure the correct rate is applied on each part of the field.

© 2025 Agritech America.

Call us today for a quote!